Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
- 10. Brake system
   10.1. Introduction
   10.2. Technical characteristics
   10.3. Replacement brake колодок on disk brakes
   10.4. A support of disk brakes
   10.5. A brake disk
   10.6. Replacement brake колодок drum-type brakes
   10.7. The working brake cylinder
   10.8. The main brake cylinder
   10.9. Brake pipelines and hoses
   10.10. Replacement of a regulator of pressure
   10.11. Prorolling of hydraulic brake system
   10.12. Adjustment of a manual brake
   10.13. Replacement of a cable of a manual brake
   10.14. Replacement brake колодок a manual brake on back disk brakes
   10.15. Additional brake system
   10.16. The vacuum amplifier of brakes
   10.17. The stoplight switch
   10.18. Antiblocking system of brakes (ABS)
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





10.12. Adjustment of a manual brake
THE GENERAL DATA

If at a tightening of the lever of a manual brake against the stop it passes a way corresponding from 5 to 8 clicks, adjustment of a manual brake means is executed correctly. If the course makes less than five clicks brake колодки will be partially pressed to a brake disk. If a course more than 8 clicks, efficiency заторможивания a manual brake the insufficient.

PERFORMANCE ORDER
1. For access to a regulator of a cable of a manual brake remove the central console.
2. Ослабьте a counternut (the top nut) also adjust position of an adjusting nut so that at a tightening of the lever of a manual brake its course made 5–8 clicks.
3. After adjustment of a manual brake tighten a counternut.
4. Establish the central console.