Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
- 10. Brake system
   10.1. Introduction
   10.2. Technical characteristics
   10.3. Replacement brake колодок on disk brakes
   10.4. A support of disk brakes
   10.5. A brake disk
   10.6. Replacement brake колодок drum-type brakes
   10.7. The working brake cylinder
   10.8. The main brake cylinder
   10.9. Brake pipelines and hoses
   10.10. Replacement of a regulator of pressure
   10.11. Prorolling of hydraulic brake system
   10.12. Adjustment of a manual brake
   10.13. Replacement of a cable of a manual brake
   10.14. Replacement brake колодок a manual brake on back disk brakes
   10.15. Additional brake system
   10.16. The vacuum amplifier of brakes
   10.17. The stoplight switch
   10.18. Antiblocking system of brakes (ABS)
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





10.2. Technical characteristics
THE GENERAL DATA

Type of a brake liquid
DOT 3 or DOT 4
Course of a rod of the switch of a stoplight
1,6 – 2,0 mm
Free wheeling of a pedal of a brake
1,2 – 3,2 mm
Height of installation of a pedal of a brake:
  – 1990-1994
158 mm
  – Since 1995
148 mm
Length of a pusher of the vacuum amplifier of brakes (since 1995)
145 mm
Disk brakes (forward and back)
The minimum thickness brake колодки
1,6 mm
The minimum thickness of a brake disk
According to marks on a disk
Disk palpation:
  – 1990-1994
0,10 mm
  – Since 1995
0,075 mm
The tightening moments
Bolts of fastening of the holder of a support:
  – The forward
70 – 88 Nanometers
  – The back
21 – 31 Nanometers
Forward directing finger of a support
34 – 45 Nanometers
Nuts of the main brake cylinder
10 – 16 Nanometers
Bolts of the terminator of pressure
20 - 28 Nanometers
Back directing finger of a support
15 – 21 nanometers
The working brake cylinder
8 – 10 Nanometers