Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
- 10. Brake system
   10.1. Introduction
   10.2. Technical characteristics
   10.3. Replacement brake колодок on disk brakes
   10.4. A support of disk brakes
   10.5. A brake disk
   10.6. Replacement brake колодок drum-type brakes
   10.7. The working brake cylinder
   10.8. The main brake cylinder
   10.9. Brake pipelines and hoses
   10.10. Replacement of a regulator of pressure
   10.11. Prorolling of hydraulic brake system
   10.12. Adjustment of a manual brake
   10.13. Replacement of a cable of a manual brake
   10.14. Replacement brake колодок a manual brake on back disk brakes
   10.15. Additional brake system
   10.16. The vacuum amplifier of brakes
   10.17. The stoplight switch
   10.18. Antiblocking system of brakes (ABS)
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





10.4. A support of disk brakes
THE GENERAL DATA

The prevention

At work brake колодок the brake dust which contains asbestos, unhealthy is formed. Therefore at support clearing do not use compressed air and do not inhale a dust.


Removal

PERFORMANCE ORDER
1. Unscrew a bolt and disconnect a brake hose from a support. For an exception вытекания a brake liquid, close an aperture of a brake hose a stopper.
2. Replacement of a brake support is a part of procedure of replacement brake колодок (subsection 10.3 see).

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Remove air from brake system.