Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
- 11. A suspension bracket
   11.1. Introduction
   11.2. Technical characteristics
   + 11.3. A forward rack
   + 11.4. A rack of a back suspension bracket
   11.5. An air self-levelled suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


трейлер на русском


11. A suspension bracket

11.1. Introduction
THE GENERAL DATA

Elements of a forward suspension bracket

1 – the stabilizer of cross-section stability
2 – clips of fastening of the stabilizer
3 – steering draught
4 – a tip of steering draught
5 – a rotary fist
6 – the bottom spherical hinge
7 – the cross-section lever
8 – the plug of fastening of the cross-section lever
9 – a protective cover of steering transfer
10 – bolts of fastening of steering transfer

Elements of a back suspension bracket (4WD)

1 – the stabilizer cross-section
Stability
2 – a clip of fastening of the stabilizer
3 – draught of the stabilizer
4 – the back cross-section lever
5 – the forward cross-section lever
6 – the longitudinal lever
7 – a fixing element of a back nave

The forward suspension bracket of independent type consists of a rack of a forward suspension bracket, cross-section levers, rotary fists and the stabilizer of cross-section stability. The top part of forward racks fastens to a body, and the bottom part fastens bolts to a rotary fist. The stabilizer of cross-section stability fastens to a beam and is connected by draughts with cross-section levers.

The independent back suspension bracket consists of a back rack, longitudinal and cross-section levers, hinges and the stabilizer of cross-section stability.