Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
- 11. A suspension bracket
   11.1. Introduction
   11.2. Technical characteristics
   + 11.3. A forward rack
   - 11.4. A rack of a back suspension bracket
      11.4.1. The back stabilizer of cross-section stability
      11.4.2. The longitudinal lever of a back suspension bracket
      11.4.3. Cross-section levers of a back suspension bracket
      11.4.4. A nave of a back suspension bracket
      11.4.5. A fixing element of a back nave
   11.5. An air self-levelled suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





11.4. A rack of a back suspension bracket

Removal

PERFORMANCE ORDER
1. On cars with a body "sedan" remove a back seat.
2. On cars with a body "versatile person" remove the part of furnish closing nuts of fastening of the top part of a back rack.
3. Lift a back part of the car and fix on supports. Remove back wheels.
4. On models with back brake drums unscrew connections of a brake hose and a brake tube. Take U-shaped скобу and remove a brake hose from an arm.
5. On models with back disk brakes unscrew a brake hose from a support and remove it from an arm on a back rack.
6. Support a fixing element of a back nave a jack.
7. Unscrew nuts and bolts of fastening of the bottom part of a back rack to a fixing element of a nave.
8. For simplification of extraction of bolts raise a jack a fixing element of a nave.
9. Support a rack and unscrew nuts of the top fastening of a back rack.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. At installation of bolts of fastening of the bottom part of a back rack to a fixing element of a nave use a jack to move a fixing element of a nave.