Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
- 12. A steering
   12.1. Introduction
   12.2. Technical characteristics
   12.3. A steering wheel
   12.4. Tips of steering draught
   12.5. Replacement of protective covers of steering transfer
   12.6. Steering transfer
   12.7. The pump of the amplifier of a steering
   12.8. Removal of air from system of a steering with the amplifier
+ 13. A body
+ 14. An electric equipment





12.7. The pump of the amplifier of a steering

Removal

PERFORMANCE ORDER
1. Uncover a filling tank of hydraulic system of the amplifier of a steering and, using a syringe, pump out a liquid from a tank.
2. Unscrew two bolts and a nut (are specified by arrows) and remove a casing приводного a belt of the pump of the amplifier of a steering.
3. Fix from проворачивания a pulley of the pump of the amplifier of a steering.
4. Unscrew a nut of fastening of a pulley.
5. Remove приводной a belt of the pump of the amplifier of a steering and the generator.
6. Unscrew bolts of fastening of an arm of support of the pipeline of the amplifier of a steering.
7. Disconnect pipelines of the amplifier of a steering from the pump and a nutritious tank.
8. Unscrew three bolts and remove the pump of the amplifier of a steering.
9. For removal of a tank from the pump of the amplifier of a steering, fix the pump in a vice with soft sponges and unscrew two bolts, which крепят a tank to the pump.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence of return to removal. Adjust a tension приводного a pump belt.
2. Fill in a new liquid and remove air from hydraulic system of the amplifier of a steering.