Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
- 13. A body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. A cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. A radiator lattice
   13.10. A forward bumper
   13.11. A back bumper
   13.12. A forward wing
   13.13. A door upholstery
   13.14. The lock, the cylinder of the lock and the handle of opening of a door
   13.15. Door glass
   13.16. Стеклоподъемник
   13.17. An external mirror
   13.18. Doors
   13.19. A luggage carrier cover
   13.20. The luggage carrier lock
   13.21. A cable of opening of the lock of a luggage carrier
   13.22. Replacement of racks of support of a back door
   13.23. A back door
   13.24. The lock of a back door, the external handle and the lock cylinder
   13.25. Casings of a steering column
   13.26. The central console
   13.27. Elements of the panel of devices
   13.28. The panel of devices
   13.29. An air inlet lattice
   13.30. Forward seats
+ 14. An electric equipment





13.10. A forward bumper
THE GENERAL DATA

Details of a forward bumper of cars with 1990 till 1994

 
1 – a bumper beam
2 – a power absorber
3 – a bumper overlay
4 – молдинг
5 – an arm
6 – an arm
7 – the top central clamp
8 – the top lateral clamp
9 – the bottom clamp

Details of a forward bumper of cars since 1995

 
1 – a bumper overlay
2 – a bumper beam
3 – an arm
4 – an arm
5 – back fastening
6 – a power absorber
7 – a clamp
8 – the bottom arms of a beam

Arrangement of lateral screws of fastening of an overlay of a bumper


Fastening of an underside of an overlay of a bumper


Arrangement of plastic connectors of fastening of the top part of an overlay of a bumper


Arrangement of the left top bolts of fastening of a bumper


Arrangement of the right top bolts of fastening of a bumper


PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove wheels.
2. Remove a forward part of a mudguard of the engine and two small lateral mudguards.
3. Unscrew bolts and screws and remove a bumper overlay (fig. the Arrangement of lateral screws of fastening of an overlay of a bumper, Fastening of an underside of an overlay of a bumper, the Arrangement of plastic connectors of fastening of the top part of an overlay of a bumper see).
4. Unscrew bolts and remove a bumper from the car (fig. the Arrangement of the left top bolts of fastening of a bumper, the Arrangement of the right top bolts of fastening of a bumper see).
5. Installation is made in sequence, return to removal.