Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
- 13. A body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. A cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. A radiator lattice
   13.10. A forward bumper
   13.11. A back bumper
   13.12. A forward wing
   13.13. A door upholstery
   13.14. The lock, the cylinder of the lock and the handle of opening of a door
   13.15. Door glass
   13.16. Стеклоподъемник
   13.17. An external mirror
   13.18. Doors
   13.19. A luggage carrier cover
   13.20. The luggage carrier lock
   13.21. A cable of opening of the lock of a luggage carrier
   13.22. Replacement of racks of support of a back door
   13.23. A back door
   13.24. The lock of a back door, the external handle and the lock cylinder
   13.25. Casings of a steering column
   13.26. The central console
   13.27. Elements of the panel of devices
   13.28. The panel of devices
   13.29. An air inlet lattice
   13.30. Forward seats
+ 14. An electric equipment





13.11. A back bumper
THE GENERAL DATA

Details of a back bumper of the car with a body "versatile person" with 1990 till 1994

 
1 – a lateral arm
2 – a bumper beam
3 – a power absorber
4 – молдинг
5 – a bumper overlay
6 – the top clamp
7 – an arm
8 – the bottom central clamp
9 – the bottom lateral clamp

Details of a back bumper of cars with a body "versatile person" since 1995

.
1 – a bumper beam
2 – a lateral arm
3 – a bumper overlay
4 – a power absorber

Arrangement of a bolt of fastening of a forward part of a back bumper


Arrangement of bolts of fastening of an overlay of a bumper


Arrangement of a bolt of fastening of a hook in a luggage space


Arrangement plastic заглушек, closing access to bolts of fastening of a bumper


Arrangement of lateral bolts of fastening of a bumper


PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports. Remove back wheels.
2. Unscrew screws (are specified by arrows) and remove back mudguards from wheel arches.
3. Unscrew internal and bottom bolts of fastening of an overlay of a bumper (fig. the Arrangement of a bolt of fastening of a forward part of a back bumper, the Arrangement of bolts of fastening of an overlay of a bumper see).
4. Remove back internal furnish of a luggage carrier. Take заглушки and unscrew on two screws from each party of fastening of a bumper (fig. the Arrangement of a bolt of fastening of a hook in a luggage space, the Arrangement plastic заглушек, closing access to bolts of fastening of a bumper, the Arrangement of lateral bolts of fastening of a bumper see).
5. Slightly put forward a bumper from the car, disconnect from it electric sockets and definitively remove a bumper.
6. Installation is made in sequence, return to removal.
7. At installation of a back bumper on models with 1990 till 1994 check up that hooks are correctly combined with body panels.
8. At installation of a back bumper on models since 1995 establish on a bumper ползуны.
9. An arrangement of directing pins on which it is necessary to establish ползуны a bumper on models since 1995.
10. At installation of a back bumper on models since 1995 fix a bumper in body flutes.