Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
- 13. A body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. A cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. A radiator lattice
   13.10. A forward bumper
   13.11. A back bumper
   13.12. A forward wing
   13.13. A door upholstery
   13.14. The lock, the cylinder of the lock and the handle of opening of a door
   13.15. Door glass
   13.16. Стеклоподъемник
   13.17. An external mirror
   13.18. Doors
   13.19. A luggage carrier cover
   13.20. The luggage carrier lock
   13.21. A cable of opening of the lock of a luggage carrier
   13.22. Replacement of racks of support of a back door
   13.23. A back door
   13.24. The lock of a back door, the external handle and the lock cylinder
   13.25. Casings of a steering column
   13.26. The central console
   13.27. Elements of the panel of devices
   13.28. The panel of devices
   13.29. An air inlet lattice
   13.30. Forward seats
+ 14. An electric equipment


вечерний костюм для полных женщин, новость взята отсюда.


13.14. The lock, the cylinder of the lock and the handle of opening of a door
THE GENERAL DATA

Details of the lock and the handle of opening of a forward door on models with 1990 till 1994

1 – the external handle
2 – an arm
3 – the lock
4 – the executive mechanism
The central blocking
5 – the internal handle
6 – a shock plate of the lock
7 – directing draughts
8 – the decorative holder
The internal handle

Details of the lock and the handle of opening of a back door on models with 1990 till 1994

1 – the external handle
2 – an arm
3 – the lock
4 – the executive mechanism
The central blocking
5 – the internal handle
6 – a shock plate of the lock
7 – directing draughts
8 – the decorative holder
The internal handle

Details of the lock and the handle of opening of a back door on models since 1995

1 – the external handle
2 – the lock
3 – the executive mechanism
The central blocking
4 – a shock plate
5 – directing draughts
6 – a clamp of the internal handle
7 – the internal handle

Details of the lock and the handle of opening of a forward door on models since 1995

1 – a clamp of the internal handle
2 – the internal handle
3 – the external handle
4 – a shock plate of the lock
5 – the lock
6 – the switch
7 – the executive mechanism
The central blocking
8 – the intermediate lever
9 – directing draughts

PERFORMANCE ORDER
1. Lift door glass, remove from a door an upholstery of a door and a protective film.
The internal handle
2. Before removal of draughts preliminary press a clamp.
3. Disconnect draughts of the lock of a door from the internal handle of opening of a door.
4. Remove directing draughts and unscrew screws of fastening of the handle (are specified by arrows).
5. Remove the internal handle of opening of a door from a door.
6. Installation is made in sequence, return to removal.
7. At installation of the internal handle of a forward door on models since 1995, ослабьте a bolt (1) fastenings of the intermediate lever also move a clamp (2) downwards then tighten a fastening bolt.
The cylinder of the lock and the external handle
8. Disconnect draughts from the cylinder of the lock and the external handle.
9. Unscrew nuts (are specified by arrows) and remove the external handle of opening of a door together with the lock cylinder.
10. For removal of the cylinder of the lock ослабьте spring скобу (1) fastenings also take the cylinder of the lock from the external handle of opening of a door.
11. Installation is made in sequence, return to removal.
The door lock
12. Remove the internal handle of opening of a door and disconnect draughts from the door lock.
13. Through an aperture at doors disconnect from the lock of draught of the external handle of opening of a door and the lock cylinder.
14. Unscrew three screws of fastening of the lock and take the lock from a door.
15. Installation is made in sequence, return to removal.