Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
- 13. A body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. A cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. A radiator lattice
   13.10. A forward bumper
   13.11. A back bumper
   13.12. A forward wing
   13.13. A door upholstery
   13.14. The lock, the cylinder of the lock and the handle of opening of a door
   13.15. Door glass
   13.16. Стеклоподъемник
   13.17. An external mirror
   13.18. Doors
   13.19. A luggage carrier cover
   13.20. The luggage carrier lock
   13.21. A cable of opening of the lock of a luggage carrier
   13.22. Replacement of racks of support of a back door
   13.23. A back door
   13.24. The lock of a back door, the external handle and the lock cylinder
   13.25. Casings of a steering column
   13.26. The central console
   13.27. Elements of the panel of devices
   13.28. The panel of devices
   13.29. An air inlet lattice
   13.30. Forward seats
+ 14. An electric equipment





13.20. The luggage carrier lock
THE GENERAL DATA

Arrangement of elements of the lock of a luggage carrier, the cylinder of the lock and cable of opening of the lock

1 – a decorative overlay of the handle of opening
The luggage carrier lock
2 – the handle of opening of the lock of a luggage carrier
3 – a cable
4 – скоба cable fastenings
5 – a folding shutter топливозаливной mouths
6 – consolidation
7 – a shock plate
8 – a lock clamp
9 – a pin
10 – the hinge
11 – a spring
12 – a drainage tube
13 – the hinge of a cover of a luggage carrier
14 – the lock
15 – draught
16 – a casing
17 – торсионы
18 – a luggage carrier cover
19 – consolidation
20 – the lock cylinder

PERFORMANCE ORDER
1. Open a cover of a luggage carrier and remove furnish of a luggage carrier about the luggage carrier lock. Using a marker, note an arrangement of the lock of a luggage carrier.
2. Before removal of the lock of a luggage carrier remove the draught connecting the lock with the cylinder of the lock.
3. Disconnect a cable of opening of a cover of a luggage carrier from скоб fastenings to a luggage carrier cover.
4. Unscrew two bolts of fastening of the lock, disconnect from the lock a cable and remove the lock of opening of a luggage carrier.
5. Installation is made in sequence, return to removal. Thus grease working surfaces of the lock of a luggage carrier.