Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
- 13. A body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. A cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. A radiator lattice
   13.10. A forward bumper
   13.11. A back bumper
   13.12. A forward wing
   13.13. A door upholstery
   13.14. The lock, the cylinder of the lock and the handle of opening of a door
   13.15. Door glass
   13.16. Стеклоподъемник
   13.17. An external mirror
   13.18. Doors
   13.19. A luggage carrier cover
   13.20. The luggage carrier lock
   13.21. A cable of opening of the lock of a luggage carrier
   13.22. Replacement of racks of support of a back door
   13.23. A back door
   13.24. The lock of a back door, the external handle and the lock cylinder
   13.25. Casings of a steering column
   13.26. The central console
   13.27. Elements of the panel of devices
   13.28. The panel of devices
   13.29. An air inlet lattice
   13.30. Forward seats
+ 14. An electric equipment





13.28. The panel of devices
THE GENERAL DATA

Arrangement of bolts of fastening of the panel of devices and electric sockets

1 – a grey socket with 15 contacts
2 – a brown socket with 22 contacts
3 – a white socket with 22 contacts
4 – a dark blue socket with 20 contacts
5 – a black socket with 22 contacts
6 – a dark blue socket with 4 contacts
7 – a black socket with 1 contact
8 – a black socket with 1 contact

PERFORMANCE ORDER
Models with 1990 for 1994
1. Remove a wire of weight from the accumulator.
2. Remove a steering wheel.
3. Remove the central console.
4. Remove decorative заглушки, closing screws of fastening of the panel of devices.
5. Remove the bottom furnish of the panel of devices. Unscrew the lever of opening of a cowl and remove it together with a cable.
6. Remove a decorative overlay of a combination of devices.
7. Remove a combination of devices and disconnect a cable of a drive of a speedometer.
8. Remove a ware box and disconnect an electric socket from the engine of the fan of a heater.
9. Unscrew 4 screws of fastening of the holder of the central part of furnish of the panel of devices and remove it.
10. Disconnect a cable of management of a heater from a heater.
11. Remove a radio receiver.
12. Unscrew bolts which крепят a steering column to the panel of devices, and lower a steering column.
13. Unscrew bolts, крепящие the panel of devices to a partition of a motor compartment, disconnect from the panel of devices electric sockets and take the panel of devices from car salon.
14. Installation is made in sequence, return to removal.
Models since 1995
15, Remove the central console.
16. Remove furnish of the bottom part of the panel of devices.
17. Remove a ware box.
18. Unscrew screws and remove the back panel of a ware box.
19. Unscrew bolts of fastening of a steering column and lower a steering column downwards.
20. Move the lever of adjustment of temperature to position "MAX COLD", then disconnect a cable of management in temperature from a heater.
21. Remove decorative заглушки and unscrew the bolts which have opened under them of fastening of end faces of the panel of devices.
22. On models with a safety air cushion disconnect on the right side under the panel of devices yellow electric sockets.
23. Disconnect electric sockets and unscrew bolts of fastening of the panel of devices.
24. Remove a lattice of a heater and unscrew opened two bolts.
25. Remove the panel of devices.
26. Installation is made in sequence, return to removal.