Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
- 13. A body
   13.1. Introduction
   13.2. Care of a body
   13.3 Care of an upholstery and rugs
   13.4. Repair of insignificant damages of a body
   13.5. Repair of strong damages of a body
   13.6. A cowl
   13.7. Replacement of the lock of a cowl
   13.8. Replacement of a cable of the lock of a cowl
   13.9. A radiator lattice
   13.10. A forward bumper
   13.11. A back bumper
   13.12. A forward wing
   13.13. A door upholstery
   13.14. The lock, the cylinder of the lock and the handle of opening of a door
   13.15. Door glass
   13.16. Стеклоподъемник
   13.17. An external mirror
   13.18. Doors
   13.19. A luggage carrier cover
   13.20. The luggage carrier lock
   13.21. A cable of opening of the lock of a luggage carrier
   13.22. Replacement of racks of support of a back door
   13.23. A back door
   13.24. The lock of a back door, the external handle and the lock cylinder
   13.25. Casings of a steering column
   13.26. The central console
   13.27. Elements of the panel of devices
   13.28. The panel of devices
   13.29. An air inlet lattice
   13.30. Forward seats
+ 14. An electric equipment





13.8. Replacement of a cable of the lock of a cowl
PERFORMANCE ORDER
1. Disconnect a cable of the lock of a cowl from the cowl lock.
2. Disconnect a cable from скоб fastenings (are specified by arrows) in a motor compartment.
3. Adhere to the end of a cable of a cowl a thin strong cord.
4. In car salon remove the bottom casing of the panel of devices from outside the driver.
5. Unscrew screws of fastening of the handle of opening of a cowl.
6. Disconnect a cable from the handle of opening of a cowl.
7. Take an old cable of opening of a cowl through a partition of a motor compartment in car salon.
8. Untie from a cable of opening of a cowl a thin cord and leave it in a partition of a motor compartment.
9. Replace a sealing ring of a cable of opening of a cowl in a partition of a motor compartment.
10. Adhere a cord to the end of a new cable of opening of a cowl and for a cord involve a cable in a motor compartment.
11. The further installation is made in sequence of return to removal.