Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
- 14. An electric equipment
   - 14.1. A body electric equipment
      14.1.1. Introduction
      14.1.2. Electric chains
      14.1.3. Detection of not closed chain
      14.1.4. Safety locks
      14.1.5. Chain breakers
      14.1.6. The relay
      14.1.7. The relay of turns and the emergency light alarm system
      14.1.8. Multipurpose switches of a steering column
      14.1.9. The ignition lock
      + 14.1.10. Replacement of switches of the panel of devices
      14.1.11. A combination of devices
      14.1.12. A radio receiver
      14.1.13. Loudspeakers
      14.1.14. The aerial
      14.1.15. The aerial with the electric drive
      14.1.16. Replacement of bulbs of headlights
      14.1.17. Adjustment of light of headlights
      14.1.18. A headlight
      14.1.19. Replacement of bulbs накаливания
      14.1.20. The screen wiper engine
      14.1.21. A sound signal
      14.1.22. Check of a heater of back glass
      14.1.23. Стеклоподъемники with the electric drive
      14.1.24. Rear-view mirrors with the electric drive
      14.1.25. A safety air cushion
   + 14.2. Electroschemes





14.1.7. The relay of turns and the emergency light alarm system
THE GENERAL DATA

Arrangement of the relay of turns on models with 1990 for 1994

 

On models with 1990 for 1994 of the relay of turns it is located behind the panel of devices to the left of a ware box.

Arrangement of the relay of turns on models since 1995

On models since 1995 of the relay of turns it is located at the left behind the panel of devices.

Arrangement of screws of fastening of the left part of an arm of a ware box on models with 1990 for 1994


Arrangement of screws of fastening of an arm of the relay of turns on models with 1990 for 1994


Arrangement of the screw of fastening of the relay of turns on models since 1995


Removal

PERFORMANCE ORDER
Models with 1990 for 1994
1. Remove a ware box.
2. Then unscrew screws, крепящие an arm of a ware box (the Arrangement of screws of fastening of the left part of an arm of a ware box fig. see models with 1990 for 1994, the Arrangement of screws of fastening of an arm of the relay of turns on models with 1990 for 1994).
3. Disconnect an electric socket from the relay of turns, then unscrew screws of fastening of an arm of the relay of turns and take the relay of turns together with an arm.
4. Remove the relay of turns from an arm.
Models since 1995
5. Remove the bottom furnish of the panel of devices from outside the driver and an arm of fastening of the lever of opening of a cowl.
6. Disconnect an electric socket from the relay of turns.
7. Unscrew the screw and take the relay of turns (the Arrangement of the screw of fastening of the relay of turns fig. see models since 1995).

Installation

Installation is made in sequence, return to removal.