Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
- 1.1. Identification numbers
   1.2. Controls and control devices
   + 1.3. Switches of illumination, turns, a washer and a glass cleaner
   1.4. Katalitichesky neutralizer
   1.5. Ventilation and air conditioning system
   1.6. Climate control system
   1.7. Cruise-control system
   1.8. A mechanical transmission
   1.9. An automatic transmission
   + 1.10. Forward seats
   1.11. An arrangement and capacity of bulbs
   + 1.12. Safety locks and electric chains
   1.13. Bases of safe operation of the car
   1.14. Wheels and tyres
   1.15. Corners of installation of wheels
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





1.6. Climate control system
THE GENERAL DATA

The prevention

Use an automatic control system of the climate control only at engine work.


1  – the  switch of adjustment of temperature;
2  – the indicator;
3  – switch AUTO;
4  – switch OFF;
5  – the switch of external temperature of air;
6  – the conditioner switch;
7  – the switch of a stream of air;
8  – the switch of speed of the fan;
9  – the button of a choice of giving of air;
10  – having blown in a windscreen;
11 – the gauge

At system work in mode AUTO if air temperature in salon decreases to the demanded temperature, the conditioner compressor is automatically switched off. For effective dispersion of a condensate from an internal surface of glasses in cold weather, include a mode "A/C".

The system the Control Climate automatically operates air temperature, speed of the fan, distribution of a stream of air, and the conditioner compressor. The temperature can be established with accuracy 0,5 C within 18–32 C.

The switch of mode AUTO

The system the Control Climate automatically operates air temperature in car salon in mode AUTO. By button AUTO pressing, control lamp AUTO lights up.

Manual installation of an operating mode

When the System the Control Climate works in mode AUTO, pressing buttons,
, Or switch off manual installation of a mode, control lamp MANUAL thus lights up.
When buttons, or are pressed, corresponding functions cope independently while automatic control of other functions is supported. To return system in an automatic mode, press button AUTO.

Switch OFF

System the Control Climate is switched off by button OFF (the compressor and the fan). When OFF it is pressed, external заслонка a ventilating aperture it will automatically be closed (system of giving of air will work in a mode рециркуляции air.

The switch of distribution of a stream of air

Ventilation
Air giving through nozzles of the panel of devices
Two levels
Air giving through nozzles of the panel of devices and in feet
Downwards
Air giving in feet
Downwards and on a windscreen
Air giving through nozzles to a windscreen and in feet

The switch of adjustment of temperature

1 – to press for temperature increase

2 – the switch of adjustment of temperature

3 – to press for temperature reduction


The prevention

Installation within a year approximately 25 C is recommended.


Temperature installation remains even after ignition deenergizing. However, if wires are disconnected from the accumulator, the temperature will be automatically established on 25 C.

The temperature is wished the switch of regulation of temperature is established by pressing: for a temperature raising press the top end of the switch, and the low end of the switch, for temperature reduction
One pressing of the switch changes temperature on 0,5 C. The temperature can be established within 18–32 C.

Switching of speed of the fan

The switch of speed of the fan has 5 positions: position AUTO and 4 various positions of speed of the fan.
For a choice of desirable speed of the fan, consistently press the button. Thus there is a consecutive increase, and then reduction of speed of the fan, to mode AUTO.

Choice of a mode of ventilation

The choice of a mode of ventilation occurs by pressing the button

There is an air circulation in car salon, without receipt of fresh air. This mode is used for fast heating or air cooling in car salon. Mode indication is defined on fire of a control lamp.
Giving of fresh external air in car salon. When air central air works in mode AUTO, the mode of giving of fresh air automatically joins. Mode indication is defined on fire of a control lamp.

The switch of removal of a condensate from a windshield
For effective dispersion of a condensate from an internal surface of glasses in cold weather, include a mode, thus irrespective of a conditioner operating mode, air stream is directed to a windscreen and lateral glasses, the control lamp thus lights up. After removal of a condensate from a windscreen, establish a conditioner operating mode in mode AUTO.