Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
- 1.1. Identification numbers
   1.2. Controls and control devices
   + 1.3. Switches of illumination, turns, a washer and a glass cleaner
   1.4. Katalitichesky neutralizer
   1.5. Ventilation and air conditioning system
   1.6. Climate control system
   1.7. Cruise-control system
   1.8. A mechanical transmission
   1.9. An automatic transmission
   + 1.10. Forward seats
   1.11. An arrangement and capacity of bulbs
   + 1.12. Safety locks and electric chains
   1.13. Bases of safe operation of the car
   1.14. Wheels and tyres
   1.15. Corners of installation of wheels
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





1.7. Cruise-control system
THE GENERAL DATA

Cruise-control gives possibility to remember and support any speed of movement of a constant, beginning from approximately 40 km/h to almost maximum.
Cruise-control should not be included, if movement with constant speed (for example, a dense transport stream, plentiful turns, slippery or dirty road) is inexpedient.
In case of an automatic transmission Cruise-control inclusion makes sense only at step D.

Inclusion of system of the Cruise-control

Control lever cruise-control system


1. Move the main switch CRUISE.
2.  Press a pedal of management of fuel giving until the car does not reach to desirable speed.
3.  Move a control lever downwards to position SET, COAST and let out it. Release a pedal of management of fuel giving, thus the car will move with the set speed.

Time acceleration


Acceleration by pressing an accelerator pedal is possible. After holiday of a pedal of an accelerator the speed of movement written down in memory is established before.

For time cancellation of work of system of the Cruise-control execute following actions:

  – Press a brake pedal;
  – Move a control lever to position CANCEL;
  – On press a coupling pedal (only cars with a mechanical transmission);
  – нереместите the selector lever in position N (only cars with an automatic transmission).

Repeated call of the speed written down in memory

Move a control lever upwards to position ACCEL, RESUME at speed over 40 km/h: the speed of movement chosen before switching-off is established.
The speed of movement brought in memory after ignition deenergizing is erased.

Deenergizing of system of the Cruise-control

Switch off the main switch of system of the Cruise-control.
Turn a key in the ignition lock in position ACC.

Increase in speed of the car

Way 1

Move a control lever upwards to position ACCEL, RESUME and keep it until the car does not reach desirable speed.
Step-by-step increase of speed of movement on 1,6 km/h, can be made by consecutive moving of a control lever upwards in position ACCEL, RESUME. Consistently press the lever until the car does not reach desirable speed.

Way 2

Press a pedal of management of fuel giving to increase speed of the car.
Move the lever downwards to position SET, COAST once therefore speed of movement of the car will be fixed.

Reduction of speed of the car

Way 1

Move a control lever downwards to position SET, COAST and keep it in this position, before achievement of demanded speed of the car.
Step-by-step reduction of speed of movement by 1,6 km/h, can be made by consecutive moving of a control lever downwards in position SET, COAST. Consistently press the lever until the car does not reach desirable speed.

Way 2

Press a pedal of a brake and brake the car till demanded speed.
Move the lever downwards to position SET, COAST once therefore speed of movement of the car will be fixed.