Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
- 1.1. Identification numbers
   1.2. Controls and control devices
   + 1.3. Switches of illumination, turns, a washer and a glass cleaner
   1.4. Katalitichesky neutralizer
   1.5. Ventilation and air conditioning system
   1.6. Climate control system
   1.7. Cruise-control system
   1.8. A mechanical transmission
   1.9. An automatic transmission
   + 1.10. Forward seats
   1.11. An arrangement and capacity of bulbs
   + 1.12. Safety locks and electric chains
   1.13. Bases of safe operation of the car
   1.14. Wheels and tyres
   1.15. Corners of installation of wheels
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





1.8. A mechanical transmission
THE GENERAL DATA

The mechanical transmission has five synchronised transfers of a forward course and backing transfer. At inclusion of transfer of a backing to press a pedal of coupling and in some seconds to make transfer inclusion.

For economy of fuel and preservation of dynamic characteristics of the car, it is necessary to make a gear change according to the table.

Transfer
Speed of km/hour
With 1 on 2
24
With 2 on 3
40
With 3 on 4
65
With 4 on 5
73

DOUBLE RANGE

Position HI – is used for normal movement.

Position LO – is used for movement downhill or on sand, thus transferred больший a twisting moment, than in position HI.

THE SELECTOR LEVER

For switching from HI to LO or on the contrary, press a coupling pedal, move the selector lever, and gradually release a pedal.