Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
- 3. Engines
   3.1. Technical characteristics
   3.2. Operations on repair of the engine established in the car
   3.3. The top dead point of the first cylinder
   3.4. A cover of a head of the block of cylinders
   3.5. An inlet collector
   + 3.6. A gear belt and pulleys
   3.7. Replacement of a forward sealing ring of a cranked shaft
   3.8. Replacement of sealing rings of camshafts
   3.9. Camshafts and pushers
   3.10. Heads of the block of cylinders
   3.11. The oil pallet
   3.12. The oil pump
   3.13. The Flywheel / a drive plate
   3.14. Replacement of a back sealing ring of a cranked shaft
   3.15. A suspension bracket of the power unit
   + 3.16. Engine major repairs
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


как назвать магазин автомасел


3.14. Replacement of a back sealing ring of a cranked shaft
PERFORMANCE ORDER
1. Remove a transmission and a flywheel.
2. The most simple way of extraction of an old sealing ring consists in that a screw-driver to hook on a sealing ring and to take it from a nest.
3. Also the sealing ring can be taken from a nest if to drill in a ring two small apertures, located in the opposite ends of a sealing ring.
4. Screw in two self-cutting screws in the drilled apertures of a sealing ring and, using flat-nose pliers, extend for heads of screws a sealing ring.
5. Grease working edges and an external surface of a new sealing ring with pure engine oil and, using tubular оправку the corresponding diameter, establish a back sealing ring of a cranked shaft.
6. The further installation is made in sequence, return to removal.