Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
- 3. Engines
   3.1. Technical characteristics
   3.2. Operations on repair of the engine established in the car
   3.3. The top dead point of the first cylinder
   3.4. A cover of a head of the block of cylinders
   3.5. An inlet collector
   + 3.6. A gear belt and pulleys
   3.7. Replacement of a forward sealing ring of a cranked shaft
   3.8. Replacement of sealing rings of camshafts
   3.9. Camshafts and pushers
   3.10. Heads of the block of cylinders
   3.11. The oil pallet
   3.12. The oil pump
   3.13. The Flywheel / a drive plate
   3.14. Replacement of a back sealing ring of a cranked shaft
   3.15. A suspension bracket of the power unit
   + 3.16. Engine major repairs
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





3.2. Operations on repair of the engine established in the car
THE GENERAL DATA

Many repair work on the engine can be spent directly on the car. Prior to the beginning of repair work it is recommended to clear the engine and a motor compartment carefully. Depending on a kind of works it is possible to remove a cowl for simplification of access to the engine.

Without removing the engine from the car, it is possible to eliminate various kinds of leaks, for example, to replace a lining of inlet and final collectors, a lining of the oil pallet, sealing rings of a cranked shaft, a lining of a head of the block of cylinders and so on. However replacement of a lining of a head of the block of cylinders is most convenient after removal of the engine from the car.

External details and units, such as inlet and final collectors, the oil pallet, the oil pump, the water pump, a starter, the generator, elements of system of ignition and fuel system can be removed from the engine for repair.

As the head of the block of cylinders can be removed without dismantle of all engine from the car both adjustment and mechanism repair газораспределения can be made without superfluous operations.