Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
- 3. Engines
   3.1. Technical characteristics
   3.2. Operations on repair of the engine established in the car
   3.3. The top dead point of the first cylinder
   3.4. A cover of a head of the block of cylinders
   3.5. An inlet collector
   + 3.6. A gear belt and pulleys
   3.7. Replacement of a forward sealing ring of a cranked shaft
   3.8. Replacement of sealing rings of camshafts
   3.9. Camshafts and pushers
   3.10. Heads of the block of cylinders
   3.11. The oil pallet
   3.12. The oil pump
   3.13. The Flywheel / a drive plate
   3.14. Replacement of a back sealing ring of a cranked shaft
   3.15. A suspension bracket of the power unit
   + 3.16. Engine major repairs
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





3.7. Replacement of a forward sealing ring of a cranked shaft
PERFORMANCE ORDER
1. Remove a gear belt and a pulley of a cranked shaft.
2. Using a screw-driver which edge is wound by a sticky tape, take a sealing ring of a cranked shaft from a nest. Thus do not damage a nest of a sealing ring and a cranked shaft. For simplification of removal of a sealing ring it is possible to cut out an aperture in a face surface of a sealing ring.
3. Clear a nest of a sealing ring and grease a new sealing ring with pure engine oil.
4. Using tubular оправку the corresponding diameter, establish a sealing ring on a cranked shaft.
5. Establish a pulley of a cranked shaft and a gear belt.