Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
- 5. Fuel system
   5.1. Introduction
   5.2. Technical characteristics
   5.3. Pressure removal in fuel system
   5.4. Check of the fuel pump
   5.5. The fuel pump
   5.6. A fuel separator (only models 4WD)
   5.7. The gauge of level of fuel
   5.8. A fuel tank
   5.9. A casing of the air filter
   5.10. An accelerator cable
   5.11. Electronic system of injection of fuel
   5.12. Fuel system
   5.13. System of giving of air
   5.14. Electronic control system
   5.15. Check of system of injection of fuel
   + 5.16. Check and replacement of elements of system of injection of fuel
   5.17. Турбонагнетатель
   5.18. Check of the executive mechanism заслонки турбонагнетателя
   5.19. The general check турбонагнетателя
   5.20. Removal and installation турбонагнетателя
+ 6. An exhaust system
+ 7. Systems of start, ignition
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





5.10. An accelerator cable

Removal and installation

PERFORMANCE ORDER
1. Remove a casing of the air filter.
2. Disconnect a cable of an accelerator from the lever throttle заслонки.
3. At presence remove a control cable of average speed from a cable arm.
4. Disconnect a cover of a cable of an accelerator from an arm, having unscrewed nuts of fastening of a cover.
5. Remove a cable of an accelerator from the top part of a pedal of management of fuel giving.
6. Take an accelerator cable in a motor compartment.
7. Installation is made in sequence, return to removal.

Adjustment

PERFORMANCE ORDER
1. Moving nuts of fastening of a cover of a cable of an accelerator to an arm, establish sagging of a cable of an accelerator within 10–12 mm.
2. Press against the stop a pedal of an accelerator and check up that throttle заслонка opens completely, and at отпускании accelerator pedals throttle заслонка comes back in a starting position.