Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
- 7. Systems of start, ignition
   7.1. Introduction
   7.2. Technical characteristics
   7.3. Accumulator check
   7.4. Accumulator gymnastics
   7.5. The accumulator
   + 7.6. Ignition system
   + 7.7. Gymnastics system
   + 7.8. System of start of the engine
+ 8. Transmissions
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





7.5. The accumulator

Removal and installation

PERFORMANCE ORDER
1. Disconnect at first negative, and then the positive plug from the accumulator.
2. Unscrew nuts (are specified by arrows) and remove a clip of fastening of the accumulator.
3. Take the accumulator from a motor compartment.
4. Installation is made in sequence, return to removal. Thus at first connect the positive plug of the accumulator, and then negative. After connection of plugs to the accumulator grease with their technical vaseline.