Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   - 8.1. A mechanical transmission
      8.1.1. Introduction
      8.1.2. Technical characteristics
      8.1.3. The gear change lever
      8.1.4. Check and replacement of support of a transmission
      8.1.5. Switches of light of a backing and neutral position КП
      8.1.6. Removal and transmission installation
   + 8.2. An automatic transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment


Барные стойки, проектирование и дизайн


8. Transmissions

8.1. A mechanical transmission

8.1.1. Introduction
THE GENERAL DATA

The transmission will transform a twisting moment transferred from the engine on size and a direction. It is necessary for maintenance of optimum speed and passableness of the car, and also for the most economic work of the engine and movement of the car by a backing. On cars SUBARU the five-step completely synchronised transmission is established. The transmission consists of the several knots bolted together and represents separate assemblage. Transmission assemblage consists from картера couplings, main картера in which the differential and a transmission and back картера are placed. On models 4WD back картер has prolongation where карданный the shaft incorporates to conducted shaft of a transmission.

Because of complexity of the device and necessity of use of special adaptations repair of a mechanical transmission in house conditions is not recommended to be made.