Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   - 8.1. A mechanical transmission
      8.1.1. Introduction
      8.1.2. Technical characteristics
      8.1.3. The gear change lever
      8.1.4. Check and replacement of support of a transmission
      8.1.5. Switches of light of a backing and neutral position КП
      8.1.6. Removal and transmission installation
   + 8.2. An automatic transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





8.1.4. Check and replacement of support of a transmission
THE GENERAL DATA

Support of a transmission of models 1996

1 – a support
2 – a back support
3 – a back beam
4 – the central beam
5 – a lining
6 – a back plate
7 – a forward beam
8 – a lining
9 – a lining
10 – a forward plate
11 – a lining

PERFORMANCE ORDER
1. Lift the car and fix on supports.
2. Insert the lever between a forward beam and a transmission, and pressing the lever, try to move a transmission. If transmission moving considerable, is necessary to check up a condition, and probably and to replace transmission support.
3. To replace a transmission support, unscrew bolts, крепящие a support to a beam and a transmission.
4. A jack raise a transmission and remove transmission support.
5. Installation is made in sequence, return to removal.