Subaru Legacy

Since 1990-1998 of release

Repair and car operation



Subaru Legasi
+ 1.1. Identification numbers
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Systems of start, ignition
- 8. Transmissions
   - 8.1. A mechanical transmission
      8.1.1. Introduction
      8.1.2. Technical characteristics
      8.1.3. The gear change lever
      8.1.4. Check and replacement of support of a transmission
      8.1.5. Switches of light of a backing and neutral position КП
      8.1.6. Removal and transmission installation
   + 8.2. An automatic transmission
+ 9. Coupling, shaft
+ 10. Brake system
+ 11. A suspension bracket
+ 12. A steering
+ 13. A body
+ 14. An electric equipment





8.1.5. Switches of light of a backing and neutral position КП
THE GENERAL DATA

Arrangement of the switch of light of a backing

The switch of light of a backing (it is specified by an arrow) is located on a left-hand side back картера transmissions.

Switches of light of a backing and neutral position of a transmission are located on the forward party back картера (models 2WD) or on картере transmissions (models 4WD).

Check

PERFORMANCE ORDER
1. Lift the car and fix on supports.
2. For switch check disconnect the electric socket located on wires of the switch and connect an ohmmeter to a socket (it is specified by an arrow) switch.
3. For check of the switch of light of a backing include a reverse gear and check up that resistance between switch contacts equally 0. Include any other transfer and check up that resistance between switch contacts equally infinity.
4. For check of the switch of neutral position of a transmission establish the transmission lever in neutral position and, using an ohmmeter, check up resistance of the switch which should be equal 0. At inclusion of any transfer resistance of the switch of neutral position should be equal to infinity.

Replacement

PERFORMANCE ORDER
For replacement of switches disconnect from the switch an electric socket and unscrew the switch from a transmission.